1、問題背景

在一個Spring boot項目中，需要使用redis作為緩存，于是將使用spring-boot-starter-data-redis，具體依賴如下：

org.springframework.bootspring-boot-starter-data-redis2.0.4.RELEASE

在測試環境中，功能測試，壓力測試，都沒有發現問題，原因是測試環境中redis自行搭建，沒有設置密碼，但是上線后，Redis使用的是A***的Pass服務的集群，并設置密碼，使用過程中發現如下問題：

(相關資料圖)

redis負載高；redis異常，錯誤信息：

com.lambdaworks.redis.RedisException: java.lang.IllegalArgumentException: Connection to XXX.XX.XXX.XXX:15000 not allowed. This connection point is not known in the cluster viewjava.lang.IllegalArgumentException: Connection to XXX.XX.XXX.XXX:15000 not allowed. This connection point is not known in the cluster viewConnection to XXX.XX.XXX.XXX:15000 not allowed. This connection point is not known in the cluster view

2、問題分析+解決方法

2.1、redis負載過高問題

2.1.1、問題原因

原本打算看一下是否是代碼邏輯問題導致redis負載過高，于是登錄redis服務器使用monitor命令觀察命令執行的頻率，發現每執行一次命令都執行一次Auth password命令，說明連接池未正確使用導致執行一次命令創建一次連接，導致負載高，并且代碼執行效率低。

2.1.2、解決方法

然后對比了使用JedisCluster的項目沒有此類問題，因此懷疑是spring-boot-starter-data-redis的RedisTemplate的問題，查看源碼后發現spring-data-redis的驅動包在某個版本之后替換為 Lettuce，在啟用集群后jedis的連接池?zé)o效。錯誤配置如下：

# 錯誤配置# Redis配置spring.redis.cluster.nodes=127.0.0.1:6379### 連接超時時間（毫秒）spring.redis.timeout=60000spring.redis.password=xxxxxxx# 連接池最大連接數（使用負值表示沒有限制）spring.redis.jedis.pool.max-active=8##連接池最大阻塞等待時間，若使用負值表示沒有限制spring.redis.jedis.pool.max-wait=-1##連接池中的最大空閑連接spring.redis.jedis.pool.max-idle=8# 連接池中的最小空閑連接spring.redis.jedis.pool.min-idle=0

需要改成正確的配置，修改之后無此現象，具體配置如下：

單機版：

# 單機版# Redis配置spring.redis.host=127.0.0.1spring.redis.port=6379### 連接超時時間（毫秒）spring.redis.timeout=60000spring.redis.password=xxxxxxx# 連接池最大連接數（使用負值表示沒有限制）spring.redis.jedis.pool.max-active=8##連接池最大阻塞等待時間，若使用負值表示沒有限制spring.redis.jedis.pool.max-wait=-1##連接池中的最大空閑連接spring.redis.jedis.pool.max-idle=8# 連接池中的最小空閑連接spring.redis.jedis.pool.min-idle=0

集群版：

#集群版 # Redis配置spring.redis.cluster.nodes=127.0.0.1:6379### 連接超時時間（毫秒）spring.redis.timeout=60000spring.redis.password=xxxxxxx# 連接池最大連接數（使用負值表示沒有限制）spring.redis.lettuce.pool.max-active=8##連接池最大阻塞等待時間，若使用負值表示沒有限制spring.redis.lettuce.pool.max-wait=-1##連接池中的最大空閑連接spring.redis.lettuce.pool.max-idle=8# 連接池中的最小空閑連接spring.redis.lettuce.pool.min-idle=0

注意：?jiǎn)⒂眉喊妫枰~外添加如下依賴

org.apache.commonscommons-pool22.8.0

2.2、redis異常 Connection to XXX.XX.XXX.XXX:15000 not allowed 問題

2.2.1、問題原因

網上搜索了一下，發現項目github上已有此問題的反饋以及解決辦法github.com/lettuce-io/…，原因是由于Lettuce其中有個配置項validateClusterNodeMembership 默認是true導致；

2.2.2、解決辦法

由于spring boot未能直接通過配置文件直接修改此配置，因此需要自定義Redis配置，具體代碼如下： MylettuceConnectionFactory.java

package com.quison.test.config;import io.lettuce.core.AbstractRedisClient;import io.lettuce.core.cluster.ClusterClientOptions;import io.lettuce.core.cluster.ClusterTopologyRefreshOptions;import io.lettuce.core.cluster.RedisClusterClient;import org.springframework.beans.DirectFieldAccessor;import org.springframework.data.redis.connection.RedisClusterConfiguration;import org.springframework.data.redis.connection.lettuce.LettuceClientConfiguration;import org.springframework.data.redis.connection.lettuce.LettuceConnectionFactory;import org.springframework.data.redis.connection.lettuce.LettucePoolingClientConfiguration;import java.util.concurrent.TimeUnit;public class MyLettuceConnectionFactory extends LettuceConnectionFactory {    public MyLettuceConnectionFactory() { }    public MyLettuceConnectionFactory(RedisClusterConfiguration redisClusterConfiguration, LettuceClientConfiguration lettuceClientConfiguration) {        super(redisClusterConfiguration, lettuceClientConfiguration);    }    @Override    public void afterPropertiesSet() {        super.afterPropertiesSet();        DirectFieldAccessor accessor = new DirectFieldAccessor(this);        AbstractRedisClient client = (AbstractRedisClient) accessor.getPropertyValue("client");        if(client instanceof RedisClusterClient){            RedisClusterClient clusterClient = (RedisClusterClient) client;            ClusterTopologyRefreshOptions topologyRefreshOptions = ClusterTopologyRefreshOptions.builder()                    .enablePeriodicRefresh(10, TimeUnit.MINUTES)                    .enableAllAdaptiveRefreshTriggers()                    .build();            ClusterClientOptions clusterClientOptions = ClusterClientOptions.builder()                     // 注意此配置項設置為false                    .validateClusterNodeMembership(false)                    .topologyRefreshOptions(topologyRefreshOptions)                    .build();            clusterClient.setOptions(clusterClientOptions);        }    }}

由于配置后，連接池也需要自行設置，因此Redis的配置文件修改為如下設置 RedisConfig.java

package com.quison.test.config;import org.apache.commons.pool2.impl.GenericObjectPoolConfig;import org.springframework.beans.factory.annotation.Autowired;import org.springframework.beans.factory.annotation.Value;import org.springframework.boot.autoconfigure.condition.ConditionalOnMissingBean;import org.springframework.boot.autoconfigure.data.redis.RedisProperties;import org.springframework.context.annotation.Bean;import org.springframework.context.annotation.Configuration;import org.springframework.context.annotation.Primary;import org.springframework.data.redis.connection.*;import org.springframework.data.redis.connection.lettuce.DefaultLettucePool;import org.springframework.data.redis.connection.lettuce.LettuceClientConfiguration;import org.springframework.data.redis.connection.lettuce.LettucePoolingClientConfiguration;import org.springframework.data.redis.core.RedisTemplate;import org.springframework.data.redis.serializer.RedisSerializer;import org.springframework.data.redis.serializer.StringRedisSerializer;import java.time.Duration;import java.util.Arrays;import java.util.HashSet;import java.util.Set;@Configurationpublic class RedisConfig {    @Value("${spring.redis.cluster.nodes}")    private String clusterNodes;    @Value("${spring.redis.password}")    private String password;    @Value("${spring.redis.lettuce.pool.max-idle}")    private Integer maxIdle;    @Value("${spring.redis.lettuce.pool.max-active}")    private Integer maxActive;    @Value("${spring.redis.cluster.max-redirects}")    private Integer maxRedirects;    @Bean    public RedisConnectionFactory myRedisConnectionFactory() {        RedisClusterConfiguration redisClusterConfiguration = new RedisClusterConfiguration();        String[] serverArray = clusterNodes.split(",");        Set nodes = new HashSet();        for (String ipPort : serverArray) {            String[] ipAndPort = ipPort.split(":");            nodes.add(new RedisNode(ipAndPort[0].trim(), Integer.valueOf(ipAndPort[1])));        }        redisClusterConfiguration.setPassword(RedisPassword.of(password));        redisClusterConfiguration.setClusterNodes(nodes);        redisClusterConfiguration.setMaxRedirects(maxRedirects);        GenericObjectPoolConfig genericObjectPoolConfig = new GenericObjectPoolConfig();        genericObjectPoolConfig.setMaxIdle(maxIdle);        genericObjectPoolConfig.setMinIdle(8);        genericObjectPoolConfig.setMaxTotal(maxActive);        genericObjectPoolConfig.setMaxWaitMillis(10000);        LettuceClientConfiguration clientConfig = LettucePoolingClientConfiguration.builder()                .commandTimeout(Duration.ofMillis(10000))                .poolConfig(genericObjectPoolConfig)                .build();        return new MyLettuceConnectionFactory(redisClusterConfiguration, clientConfig);    }    /**     * redis模板，存儲關鍵字是字符串，值是Jdk序列化     *     * @param myRedisConnectionFactory     * @return     * @Description:     */    @Bean    @ConditionalOnMissingBean(name = "redisTemplate")    @Primary    public RedisTemplate redisTemplate(RedisConnectionFactory myRedisConnectionFactory) {        RedisTemplate redisTemplate = new RedisTemplate<>();        redisTemplate.setConnectionFactory(myRedisConnectionFactory);        //key序列化方式;但是如果方法上有Long等非String類型的話，會報類型轉換錯誤；        RedisSerializer redisSerializer = new StringRedisSerializer();        redisTemplate.setKeySerializer(redisSerializer);        redisTemplate.setHashKeySerializer(redisSerializer);        //默認使用JdkSerializationRedisSerializer序列化方式;會出現亂碼，改成StringRedisSerializer        StringRedisSerializer stringSerializer = new StringRedisSerializer();        redisTemplate.setKeySerializer(stringSerializer);        redisTemplate.setValueSerializer(stringSerializer);        redisTemplate.setHashKeySerializer(stringSerializer);        redisTemplate.setHashValueSerializer(stringSerializer);        return redisTemplate;    }}